Confession here. I'm a chronic loser of needles. And finder of them. As in, "Ouch, is that a needle I stepped on/sat on?" On occasion so has my husband/kid/father. Yep, it's a problem.
My sewing room is no exception. Typically it's clean for about a New York minute before there is scraps and thread on the floor, coupled with the random chicken feed and various basket/glass/framing/painting projects.
And we like our crafting rooms to be pretty too. Mine is a spring green with an Arts and Crafts stencil around the top of the ceiling. While there are things I don't like and need to be repaired, it's a sanctuary and I can spend hours in there.
A while back I purchased two half dolls on eBay. I didn't check their sizes and while the one was large as I expected her to be, the other was tiny, I mean really tiny. I put them aside as I've been frantically attempting to finish the BOM and do yet another project that I'll show you later. Because my workplace has been demanding so much of my time lately, I haven't gotten a chance to do too much sewing or crafting as of late so I really wanted to make something that could be done quickly to take that "crafty edge" off.
Do you ever feel that "crafting edge"? When you just need to make SOMETHING or you'll be a horrible grouch all day because you feel that you haven't accomplished anything creatively? That's where I found myself, just thinking, if I could make something quick I'd feel so much better.
Then these half dolls came to mind. That was the answer.
I'm almost embarrassed to show you how I made them because the process was so haphazard. I basically choose a cotton fabric that had been washed, dried and ironed and cut a rectangle that fit around the doll's waist. The smaller doll I made about 3" x 5" ( I forget what side I did the larger doll) and I should have made the height bigger. I tapered off the top of the rectangle to bring it in more at the waist.
After cutting my rectangle, I ran a seam of zigzag stitching at the very top to prevent as much fraying as I could. I followed this about 1/8" below with a straight gathering stitch at it's widest setting and back-stitched at the end so I wouldn't be pulling the thread out.
Then I sewed on three sides making sure I didn't go over my gathering thread.
We need to make the doll stand and that is relatively simple. Fold your skirt piece out and sew across the corners like so.
Trim off the excess.
Turn out and fill. Ideally, I would fill this with chopped up walnut shells or something similar that would sharpen my needles but I have some plastic pellets I bought about 20 years ago that need to be used up so that is what I used.
Apparently there is a limit to a blog post so we'll continue in the next installment....
My sewing room is no exception. Typically it's clean for about a New York minute before there is scraps and thread on the floor, coupled with the random chicken feed and various basket/glass/framing/painting projects.
And we like our crafting rooms to be pretty too. Mine is a spring green with an Arts and Crafts stencil around the top of the ceiling. While there are things I don't like and need to be repaired, it's a sanctuary and I can spend hours in there.
A while back I purchased two half dolls on eBay. I didn't check their sizes and while the one was large as I expected her to be, the other was tiny, I mean really tiny. I put them aside as I've been frantically attempting to finish the BOM and do yet another project that I'll show you later. Because my workplace has been demanding so much of my time lately, I haven't gotten a chance to do too much sewing or crafting as of late so I really wanted to make something that could be done quickly to take that "crafty edge" off.Do you ever feel that "crafting edge"? When you just need to make SOMETHING or you'll be a horrible grouch all day because you feel that you haven't accomplished anything creatively? That's where I found myself, just thinking, if I could make something quick I'd feel so much better.
Then these half dolls came to mind. That was the answer.
I'm almost embarrassed to show you how I made them because the process was so haphazard. I basically choose a cotton fabric that had been washed, dried and ironed and cut a rectangle that fit around the doll's waist. The smaller doll I made about 3" x 5" ( I forget what side I did the larger doll) and I should have made the height bigger. I tapered off the top of the rectangle to bring it in more at the waist. After cutting my rectangle, I ran a seam of zigzag stitching at the very top to prevent as much fraying as I could. I followed this about 1/8" below with a straight gathering stitch at it's widest setting and back-stitched at the end so I wouldn't be pulling the thread out.
Then I sewed on three sides making sure I didn't go over my gathering thread.
We need to make the doll stand and that is relatively simple. Fold your skirt piece out and sew across the corners like so.
Trim off the excess.
Apparently there is a limit to a blog post so we'll continue in the next installment....
No comments:
Post a Comment